What are the five cleaning factors of automatic ultrasonic cleaning machine? Take a look below:

1: Frequency

For different washing devices, choose different ultrasonic frequencies. Hardware, machinery, steam conflict, compressor and other work or heavy pollution of the same usual object clean most choose 20KHz frequency cleaner; Optics, optoelectronics, circuit boards, the implementation room of the same usual equipment mostly choose 40KHz frequency; The strategy machine microelectronic components, integrated circuit chips, silicon wafers and wave films are mostly selected at frequencies above 80KHz, which can remove micron and submicron level dirt and clean samples without damage.

2: Power

Now our general standard products have set the product capacity is proportional to the ultrasonic power (ultrasonic power is 0.3-0.5W/cm2); High-power products are used for hardware, machines and other work of the same as usual object washing or heavy pollution (ultrasonic power is 0.5-1W/cm2).

3: The moment

Different washing devices should be set different washing time, choose a consistent time (the same usual washing time 10-20min) is conducive to better washing samples; Too long a time will cause the surface of the sample to be mottled and hinder the surface finish. The hour is too short to be brushed.

4: Temperature

Due to the different physical characteristics of each equipment, different washing temperatures should be selected when washing, such as the oil class is the same as usual greater than 50℃; Aluminum parts, ultrasonic washing machine the same as usual to choose 40℃ you, the temperature is too high, will form oxidation spots; Burr class the same as usual to choose less than 15℃ is appropriate. The constant temperature technology, to ensure that the washing device in the constant temperature environment without damage to the incident (our constant temperature product constant temperature 0-80℃, ±2℃).